Saltar al contenido principal

Logitech Dual Action disassembly

Qué necesitas

  1. Logitech Dual Action disassembly, Taking out the screws: paso 1, imagen 1 de 1
    • To get into the controller, you will need to unscrew the 7 screws on the back.

    • You will have to remove the bottom oval sticker to reveal the screw circled in orange.

  2. Logitech Dual Action disassembly, Opening the controller: paso 2, imagen 1 de 3 Logitech Dual Action disassembly, Opening the controller: paso 2, imagen 2 de 3 Logitech Dual Action disassembly, Opening the controller: paso 2, imagen 3 de 3
    • With the screws removed, turn the controller upside down. Insert the iFixit opening tool between the top and bottom casing to pry them apart.

    • Separate the top and bottom casing.

    • It is likely that the buttons will fall out of place, so as you open the controller, try to keep track of where the pieces go.

    • There should be the four circular buttons labeled 1-4, four smaller circular buttons for the D-Pad, and three rounded rectangular buttons.

  3. Logitech Dual Action disassembly, Cleaning the buttons: paso 3, imagen 1 de 1
    • Turn the top casing of the controller over to remove all the buttons.

    • Wipe each individual button with a piece of cloth and rubbing alcohol.

Linea de Meta

10 personas más completaron esta guía.

Brian Neuman

Miembro Desde 01/20/15

893 Reputación

3 Guías creadas

Equipo

USF Tampa, Team 7-4, Remmell Winter 2015 Miembro de USF Tampa, Team 7-4, Remmell Winter 2015

USFT-REMMELL-W15S7G4

4 Miembros

3 Guías creadas

Un comentario

What is the right side of dpad buttons when put back?

There a polish side and another with fabric numbers. What side have to be up and down?

rodrigomarshmallow - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 35

Ultimos 30 días: 96

Todo El Tiempo: 6,171