Saltar al contenido principal

Logitech Dexxa Joystick Secondary Button Cap Replacement

Qué necesitas

  1. Logitech Dexxa Joystick Secondary Button Cap Replacement, Trigger Cap: paso 1, imagen 1 de 3 Logitech Dexxa Joystick Secondary Button Cap Replacement, Trigger Cap: paso 1, imagen 2 de 3 Logitech Dexxa Joystick Secondary Button Cap Replacement, Trigger Cap: paso 1, imagen 3 de 3
    • Unplug your Joystick before use.

    • Remove the three 2 mm screws on the right panel.

    • Remove the right cover panel

    • Open the joystick

    • Open gently to prevent the joystick from falling apart

  2. Logitech Dexxa Joystick Secondary Button Cap Replacement: paso 2, imagen 1 de 2 Logitech Dexxa Joystick Secondary Button Cap Replacement: paso 2, imagen 2 de 2
    • Remove the top panel

    • Remove the button cap

  3. Logitech Dexxa Joystick Secondary Button Cap Replacement, Secondary Button Cap: paso 3, imagen 1 de 3 Logitech Dexxa Joystick Secondary Button Cap Replacement, Secondary Button Cap: paso 3, imagen 2 de 3 Logitech Dexxa Joystick Secondary Button Cap Replacement, Secondary Button Cap: paso 3, imagen 3 de 3
    • Unscrew the two silver 1 mm screws

    • Remove the circuit board

    • Push the purple secondary button cap out from its slot

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 65