Repara tus cosas Comunidad Tienda

Lite-On iHAS324 Face Plate Replacement

Qué necesitas

  1. Lite-On iHAS324 Face Plate Replacement, Chassis: paso 1, imagen 1 de 2 Lite-On iHAS324 Face Plate Replacement, Chassis: paso 1, imagen 2 de 2

    • Insert a paper clip into a small hole on the right side of the faceplate bellow the disc tray.

    • There may be resistance, do not be afraid to use force.

    • The tray should then pop open.

    • Pull out the tray so that it is fully extended.

    Editar

  2. Lite-On iHAS324 Face Plate Replacement: paso 2, imagen 1 de 3 Lite-On iHAS324 Face Plate Replacement: paso 2, imagen 2 de 3 Lite-On iHAS324 Face Plate Replacement: paso 2, imagen 3 de 3

    • Use a plastic opening tool to push the three tabs located on the right, left, and bottom side of the outer chassis to loosen the faceplate off.

    Editar

  3. Lite-On iHAS324 Face Plate Replacement: paso 3, imagen 1 de 1

    • Pull the faceplate off the chassis.

    • Do NOT pull the faceplate all the way off the disc tray, because doing so can cause damage to the faceplate.

    • There may be resistance, do not be afraid to use force.

    Editar

  5. Lite-On iHAS324 Face Plate Replacement: paso 4, imagen 1 de 1

    • Using the Phillips Head #2 screwdriver, unscrew the two 8.5 mm screws located on the bottom back of the chassis.

    Editar

  6. Lite-On iHAS324 Face Plate Replacement: paso 5, imagen 1 de 1

    • Remove the bottom plate by lifting it off the device.

    Editar

  7. Lite-On iHAS324 Face Plate Replacement: paso 6, imagen 1 de 1

    • Turn the device over.

    • Remove the top plate by pulling the sides and lifting the plate off.

    Editar

  8. Lite-On iHAS324 Face Plate Replacement, Disc Tray: paso 7, imagen 1 de 2 Lite-On iHAS324 Face Plate Replacement, Disc Tray: paso 7, imagen 2 de 2

    • Push the left tab in and slide the tray out on the left side.

    • Pull the gray plastic casing on the right side away from the tray.

    • Slide the right side of the tray out.

    Editar

  9. Lite-On iHAS324 Face Plate Replacement, Face Plate: paso 8, imagen 1 de 1

    • Slide the faceplate off the disc tray.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 2 otros colaboradores

Kayla Culpepper

Miembro Desde 03/22/15

675 Reputación

5 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

Baylor, Team 5-9, Williams Spring 2015 Miembro de Baylor, Team 5-9, Williams Spring 2015

BU-WILLIAMS-S15S5G9

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 6

Todo El Tiempo: 473