Introducción

Remove the top cover of the optical drive to access the internals and replace any malfunctioning components.

Insert an open paper clip into the small hole on the left side of the faceplate.
  • Insert an open paper clip into the small hole on the left side of the faceplate.

  • The tray should click open, extend it fully.

Agregar Comentario

Use an opening device to push in the black tabs on the left, right and bottom of the outer chassis to unhook the faceplate.
  • Use an opening device to push in the black tabs on the left, right and bottom of the outer chassis to unhook the faceplate.

Agregar Comentario

  • Pull the faceplate away from the main chassis.

Agregar Comentario

  • Unscrew the four 8.5 mm screws on the bottom chassis using a Philips #2 screwdriver.

Agregar Comentario

  • Lift the top and bottom chassis straight up in order to remove them.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

James Biggs

Miembro Desde 12/10/11

596 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 6-5, Regan Fall 2011 Miembro de Cal Poly, Team 6-5, Regan Fall 2011

CPSU-REGAN-F11S6G5

2 Miembros

3 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 4

Todo El Tiempo: 2,318