Saltar al contenido principal

Introducción

Will your groovy disco ball not turn on? This guide will teach you to remove and replace the switch so you can get back to your partying.

  1. Unplug the device to avoid injury. Use a Phillips head screwdriver to unscrew the single screw.
    • Unplug the device to avoid injury.

    • Use a Phillips head screwdriver to unscrew the single screw.

    • Hold on to the nut from the other side so you do not lose it.

    • Remove the panel that conceals the switch.

  2. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  3. Hold on to the red disc with needle nosed pliers, and use the Phillips head screwdriver to remove the disc by pushing down.
    • Hold on to the red disc with needle nosed pliers, and use the Phillips head screwdriver to remove the disc by pushing down.

  4. Remove and replace the white switch. Do not be afraid to pull as this takes a bit of force to remove.
    • Remove and replace the white switch.

    • Do not be afraid to pull as this takes a bit of force to remove.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 17-3, Forte Winter 2014 Miembro de Cal Poly, Team 17-3, Forte Winter 2014

CPSU-FORTE-W14S17G3

5 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 465