Repara tus cosas Comunidad Tienda

Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal

Introducción

If you just can't find out what is wrong with your disco ball, you will probably need to open it to troubleshoot it. This guide will walk you through the steps to do that.

Qué necesitas

  1. Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal, Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: paso 1, imagen 1 de 1

    • Turn the device over so that the base is on top.

    Editar

  3. Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: paso 2, imagen 1 de 1

    • Peel off the piece of metal that is glued to hold the two halves of the base together.

    • You may need rubber cement to reapply the piece of metal when reassembling the device.

    Editar

  4. Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: paso 3, imagen 1 de 2 Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: paso 3, imagen 2 de 2

    • Unscrew the four 10mm Phillips head screws on the bottom of the device.

    • Once the base is removed, the device should look as shown on the picture.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 8 otros colaboradores

Nick Kaprielian

Miembro Desde 01/14/14

525 Reputación

4 Guías creadas

Insignias: 12

+ 9 más insignias

Equipo

Cal Poly, Team 17-3, Forte Winter 2014 Miembro de Cal Poly, Team 17-3, Forte Winter 2014

CPSU-FORTE-W14S17G3

5 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 549