LexiBook Tablet One Speaker Replacement - Guía de reparación iFixit

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Introducción

This guide will show you how to replace your speaker which will require a plastic spudger and soldering iron.

Qué necesitas

Paso 1 Speaker

LexiBook Tablet One Speaker Replacement, Speaker: paso 1, imagen 1 de 3

LexiBook Tablet One Speaker Replacement, Speaker: paso 1, imagen 2 de 3

LexiBook Tablet One Speaker Replacement, Speaker: paso 1, imagen 3 de 3

Insert the blue plastic opening tool where the case has a seam. Move side to side until you hear a clip pop. Move around the edge of the case until all clips are separated. The clips are 1.5 in. apart within the case.

Paso 2

LexiBook Tablet One Speaker Replacement: paso 2, imagen 1 de 2

LexiBook Tablet One Speaker Replacement: paso 2, imagen 2 de 2

After successfully separating the casing insert a plastic spudger between the case and the speaker. Carefully pry the speaker out. Once the speaker is removed set the back casing aside.

Paso 3

LexiBook Tablet One Speaker Replacement: paso 3, imagen 1 de 1

Using a soldering gun, apply heat where the speaker wires meet the motherboard. Heat the solder around both the black and red wires until they easily slide away.
Be careful not to heat the motherboard too long so to avoid damaging other components. Also, care to avoid liquefying the solder on any near by components.
How to Solder is IFixIt's official guide to use a soldering gun.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Jordan

Miembro Desde 03/11/15

645 Reputación

4 Guías creadas

+ 15 más insignias

Equipo

Colorado Springs, Team 2-5, Panko Spring 2015 Miembro de Colorado Springs, Team 2-5, Panko Spring 2015

UCCS-PANKO-S15S2G5

3 Miembros

10 Guías creadas

0 comentarios

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 116