Repara tus cosas Comunidad Tienda

Levoit LV-H132 LED Replacement

Introducción

Are the LED lights on your Levoit LV-H132 not lighting up, flickering, or dimming? If so, use this guide to replace the LED lights. This repair is required to enable the user to determine the status of their device.

Qué necesitas

  1. Levoit LV-H132 LED Replacement, LED: paso 1, imagen 1 de 2 Levoit LV-H132 LED Replacement, LED: paso 1, imagen 2 de 2

    • Pry off the plastic top using a metal spudger.

    Editar

  2. Levoit LV-H132 LED Replacement: paso 2, imagen 1 de 2 Levoit LV-H132 LED Replacement: paso 2, imagen 2 de 2

    • Remove the three 1.2 mm screws with a Phillips #1 screwdriver.

    Editar

  4. Levoit LV-H132 LED Replacement: paso 3, imagen 1 de 2 Levoit LV-H132 LED Replacement: paso 3, imagen 2 de 2

    • Disconnect the top half from the bottom.

    Editar

  5. Levoit LV-H132 LED Replacement: paso 4, imagen 1 de 3 Levoit LV-H132 LED Replacement: paso 4, imagen 2 de 3 Levoit LV-H132 LED Replacement: paso 4, imagen 3 de 3

    • Disconnect the circuit board cable.

    Editar

  6. Levoit LV-H132 LED Replacement: paso 5, imagen 1 de 2 Levoit LV-H132 LED Replacement: paso 5, imagen 2 de 2

    • Remove the two 5 mm screws with a Phillips #1 screwdriver.

    Editar

  7. Levoit LV-H132 LED Replacement: paso 6, imagen 1 de 1

    • Desolder the joints holding the faulty LED and switch to the PCB.

    • Slide the faulty LED out and replace it with the functional one.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 9

Todo El Tiempo: 107