Repara tus cosas Comunidad Tienda

Levoit LV-H132 Cord Replacement

Introducción

Is your Levoit LV-H132 not turning on because the cable is damaged? Does the cord create sparks when plugged in or does it smell burnt? If the power cord doesn’t allow power transmission, then the air purifier will certainly not power up. To fix that, we have to replace it. So, use this guide to fix your damaged cord.

Qué necesitas

  1. Levoit LV-H132 Cord Replacement, Cord: paso 1, imagen 1 de 2 Levoit LV-H132 Cord Replacement, Cord: paso 1, imagen 2 de 2

    • Pry off the plastic top using a metal spudger.

    Editar

  2. Levoit LV-H132 Cord Replacement: paso 2, imagen 1 de 2 Levoit LV-H132 Cord Replacement: paso 2, imagen 2 de 2

    • Remove the three 1.2 mm screws with a Phillips #1 screwdriver.

    Editar

  4. Levoit LV-H132 Cord Replacement: paso 3, imagen 1 de 2 Levoit LV-H132 Cord Replacement: paso 3, imagen 2 de 2

    • Disconnect the top half from the bottom.

    Editar

  5. Levoit LV-H132 Cord Replacement: paso 4, imagen 1 de 3 Levoit LV-H132 Cord Replacement: paso 4, imagen 2 de 3 Levoit LV-H132 Cord Replacement: paso 4, imagen 3 de 3

    • Disconnect the circuit board cable.

    Editar

  6. Levoit LV-H132 Cord Replacement: paso 5, imagen 1 de 2 Levoit LV-H132 Cord Replacement: paso 5, imagen 2 de 2

    • Use a heat gun to heat up the heat-shrink tubing wraps.

    • Disconnect the damaged cable from the wires that are connected to the motherboard.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 14

Todo El Tiempo: 181