Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
Here, we will describe how to dissemble your camera in order to properly replace the lens cover.
Qué necesitas
-
-
Unscrew the two small screws on the black side panel of the camera using a PH00 screwdriver. Remove the part.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
Un comentario
I found that additional steps are needed between steps 2 and 3 to remove 5 additional screws before the front panel can be removed.
Was my Olympus 850 SW different from the one repaired in that tutorial?
I took pictures that I could insert in the tutorial, but did not find how to do it.
Michel