Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Here, we will describe how to dissemble your camera in order to properly replace the lens cover.

Partes

No se especificaron partes.

  1. Unscrew the two small screws on the black side panel of the camera using a PH00 screwdriver. Remove the part.
    • Unscrew the two small screws on the black side panel of the camera using a PH00 screwdriver. Remove the part.

  2. You will need to remove the front panel in order to access the lens. Lift the latches on the side of the front panel to remove it entirely, pulling gently in an upward motion.
    • You will need to remove the front panel in order to access the lens. Lift the latches on the side of the front panel to remove it entirely, pulling gently in an upward motion.

  3. Locate silver lens covering.
    • Locate silver lens covering.

  4. Use your PH00 screwdriver to unscrew the lens cover.
    • Use your PH00 screwdriver to unscrew the lens cover.

    • Remove the screw.

    • Remove the lens cover.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

I found that additional steps are needed between steps 2 and 3 to remove 5 additional screws before the front panel can be removed.

Was my Olympus 850 SW different from the one repaired in that tutorial?

I took pictures that I could insert in the tutorial, but did not find how to do it.

Michel

Michel Martin - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 684