Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

This guide shows how to properly remove the bottom case.

  1. Before you begin, be sure to turn off your laptop and discharge the battery down to 25%. Start by flipping the device over so that you see the screws. Remove seven Torx T5 short screws.
    • Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.

    • Start by flipping the device over so that you see the screws.

    • Remove seven Torx T5 short screws.

    • Remove three Torx T5 long screws.

    • Starting from the USB port, use your opening tool to gently pry up the case.

    • Make sure you are prying on the cover itself, not the metal shield around the USB port.

    • Pry along the laptop in the order shown by the arrows.

    • Do NOT pry along the top side, or you risk damaging the casing. Stay with the arrows.

  2. Lift the case from the bottom side. NOT the side with the hinges. When you feel resistance, do NOT keep lifting or you will damage the housing. Once you feel resistance, gently pull the case towards you. (away from the hinges.)
    • Lift the case from the bottom side. NOT the side with the hinges.

    • When you feel resistance, do NOT keep lifting or you will damage the housing.

    • Once you feel resistance, gently pull the case towards you. (away from the hinges.)

    • Remove the case.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Aiden

Miembro Desde 19/09/15

14,708 Reputación

20 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 26

Ultimos 30 días: 75

Todo El Tiempo: 5,604