Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Introducción

After a certain period of time or number of uses, a battery loses how long it can stay alive after a single charge. This guide will aid a user in removing the back panel in order to be able to reach and securely remove the battery so as to replace it.

  1. Before opening your laptop, make sure it is powered off.
    • Before opening your laptop, make sure it is powered off.

    • Remove the ten 3.3 mm screws from the base cover using a T5 Torx screwdriver.

  2. Slide the plastic opening tool between the base cover and the frame to pry open the computer.
    • Slide the plastic opening tool between the base cover and the frame to pry open the computer.

    • Slowly go around the entire perimeter of the computer until all edges are loose.

    • Make sure the plastic opening tool doesn't go too far into the device.

  3. Remove the panel and place it in a safe location.
    • Remove the panel and place it in a safe location.

  4. Remove the six 3.5 mm screws surrounding the battery using a Phillips 00 screwdriver.
    • Remove the six 3.5 mm screws surrounding the battery using a Phillips 00 screwdriver.

  5. Using either tweezers or your fingers, disconnect the black battery cable by pinching either side of the connector and pulling towards the battery.
    • Using either tweezers or your fingers, disconnect the black battery cable by pinching either side of the connector and pulling towards the battery.

  6. Carefully lift and remove the battery.
    • Carefully lift and remove the battery.

Conclusión

To reassemble your device, follow these instructions in reverse order.

17 personas más completaron esta guía.

Equipo

Cal Poly, Team 12-17, Maness Fall 2015 Miembro de Cal Poly, Team 12-17, Maness Fall 2015

CPSU-MANESS-F15S12G17

4 Miembros

5 Guías creadas

Very good and very easy to understand

barri.smith - Contestar

Your really good love watching how you take apart Samsung S5 me I want to take out my mother board

and replace it with a motherboard that recognizes Optus and also download the firmware which it cannot do right now

had it repaired stuffed the phone right up so not sure if I can do this as good as you have the tools

Raewyn Dowd - Contestar

does this same process work for a lonovo yoga pro 2?

Abi Alexander - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 20

Ultimos 7 días: 148

Ultimos 30 días: 776

Todo El Tiempo: 37,189