Repara tus cosas Comunidad Tienda

Lenovo Vibe Z2 Pro Motherboard Replacement

Introducción

If your phone no longer powers on after replacing the battery, your motherboard might be defective. Learn how to replace it in this guide.

Qué necesitas

  1. Lenovo Vibe Z2 Pro Motherboard Replacement, Lenovo Vibe Z2 Pro Backplate Disassembly: paso 1, imagen 1 de 2 Lenovo Vibe Z2 Pro Motherboard Replacement, Lenovo Vibe Z2 Pro Backplate Disassembly: paso 1, imagen 2 de 2

    • Remove the 4.9 mm torx head screws located on the camera plate on the back of the phone

    Traducir

  2. Lenovo Vibe Z2 Pro Motherboard Replacement: paso 2, imagen 1 de 1

    • Remove the 3.65 mm Torx head screws at the bottom of the phone.

    Traducir

  3. Lenovo Vibe Z2 Pro Motherboard Replacement: paso 3, imagen 1 de 2 Lenovo Vibe Z2 Pro Motherboard Replacement: paso 3, imagen 2 de 2

    • Remove the SIM card tray by pushing a pin into the hole on the side of the phone.

    Traducir

  4. Lenovo Vibe Z2 Pro Motherboard Replacement: paso 4, imagen 1 de 2 Lenovo Vibe Z2 Pro Motherboard Replacement: paso 4, imagen 2 de 2

    • Push the Spudger along the gap between the phone and the backplate to separate them.

    Traducir

  5. Lenovo Vibe Z2 Pro Motherboard Replacement: paso 5, imagen 1 de 1

    • Carefully pull the backplate away from the phone.

    Traducir

  6. Lenovo Vibe Z2 Pro Motherboard Replacement, Battery: paso 6, imagen 1 de 2 Lenovo Vibe Z2 Pro Motherboard Replacement, Battery: paso 6, imagen 2 de 2

    • Peel away protective the film using your hands.

    Traducir

  8. Lenovo Vibe Z2 Pro Motherboard Replacement: paso 7, imagen 1 de 2 Lenovo Vibe Z2 Pro Motherboard Replacement: paso 7, imagen 2 de 2

    • Remove any adhesive strips holding the battery in place gently using a fingernail or spudger.

    • The regular black nylon spudger should be used whenever possible, especially around batteries.

    Traducir

  9. Lenovo Vibe Z2 Pro Motherboard Replacement: paso 8, imagen 1 de 1

    • Disconnect the orange battery ribbon cable by gently lifting with a spudger.

    Traducir

  10. Lenovo Vibe Z2 Pro Motherboard Replacement: paso 9, imagen 1 de 3 Lenovo Vibe Z2 Pro Motherboard Replacement: paso 9, imagen 2 de 3 Lenovo Vibe Z2 Pro Motherboard Replacement: paso 9, imagen 3 de 3

    • Insert a fingernail or spudger into either side of the battery and lift upward.

    • Remove the battery from phone.

    Traducir

  11. Lenovo Vibe Z2 Pro Motherboard Replacement, Motherboard: paso 10, imagen 1 de 3 Lenovo Vibe Z2 Pro Motherboard Replacement, Motherboard: paso 10, imagen 2 de 3 Lenovo Vibe Z2 Pro Motherboard Replacement, Motherboard: paso 10, imagen 3 de 3

    • Remove the 3.15mm Phillips Head #000 screws from motherboard.

    Traducir

  12. Lenovo Vibe Z2 Pro Motherboard Replacement: paso 11, imagen 1 de 3 Lenovo Vibe Z2 Pro Motherboard Replacement: paso 11, imagen 2 de 3 Lenovo Vibe Z2 Pro Motherboard Replacement: paso 11, imagen 3 de 3

    • Disconnect the two ribbon cables by gently lifting on the black hinges and pulling away with tweezers

    Traducir

  13. Lenovo Vibe Z2 Pro Motherboard Replacement: paso 12, imagen 1 de 2 Lenovo Vibe Z2 Pro Motherboard Replacement: paso 12, imagen 2 de 2

    • Gently disconnect the rear-camera connector

    Traducir

  14. Lenovo Vibe Z2 Pro Motherboard Replacement: paso 13, imagen 1 de 2 Lenovo Vibe Z2 Pro Motherboard Replacement: paso 13, imagen 2 de 2

    • Gently remove the front-facing camera by gently lifting on the connector tab.

    • Remove the other connector by gently lifting with a spudger.

    Traducir

  15. Lenovo Vibe Z2 Pro Motherboard Replacement: paso 14, imagen 1 de 2 Lenovo Vibe Z2 Pro Motherboard Replacement: paso 14, imagen 2 de 2

    • Pry off the plastic brace along the top edge of the phone

    Traducir

  16. Lenovo Vibe Z2 Pro Motherboard Replacement: paso 15, imagen 1 de 2 Lenovo Vibe Z2 Pro Motherboard Replacement: paso 15, imagen 2 de 2

    • Remove the antenna connected to the bottom piece of the screen plate

    Traducir

  17. Lenovo Vibe Z2 Pro Motherboard Replacement: paso 16, imagen 1 de 1

    • Gently lift the motherboard off the frame

    • Pull the camera out from behind the motherboard

    Traducir

  18. Lenovo Vibe Z2 Pro Motherboard Replacement: paso 17, imagen 1 de 3 Lenovo Vibe Z2 Pro Motherboard Replacement: paso 17, imagen 2 de 3 Lenovo Vibe Z2 Pro Motherboard Replacement: paso 17, imagen 3 de 3

    • Using a spudger, disconnect the charging port assembly cable and the screen connection cable.

    • Remove the motherboard completely.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Mitchell Beall

Miembro Desde 09/15/16

407 Reputación

1 Guía escrita

Insignias: 12

+ 9 más insignias

Equipo

USF Tampa, Team 18-3, Blackwell Fall 2016 Miembro de USF Tampa, Team 18-3, Blackwell Fall 2016

USFT-BLACKWELL-F16S18G3

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 2,038