1. Start by removing the button covers by prying them off.
    • Start by removing the button covers by prying them off.

  2. Next Remove the two screw found under the buttons.
    • Next Remove the two screw found under the buttons.

    • Using a plastic spudger carefully pry open the the outer perimeter of the tablet.

    • Next remove the ribbon cable lift up the tab on the back end and slide it out.

      • Only the back side of the cable has been removed—the other can remain connected.

    • Remove this screw and lift out the whole assembly.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 38

Todo El Tiempo: 58