Saltar al contenido principal

Introducción

Use this guide if either your power or volume buttons have stopped working or if you just want to clean them.

Partes

No se especificaron partes.

  1. Remove the button on the front of the tablet that has the arrow pointing to  the left .
    • Remove the button on the front of the tablet that has the arrow pointing to the left .

    • You can do this by putting your fingernail or a Spudger underneath the button and pulling up.

  2. Remove the 2 screws found under the button you just removed with  a size #00 Philips Head Screwdriver.
    • Remove the 2 screws found under the button you just removed with a size #00 Philips Head Screwdriver.

  3. Use a plastic spudger to pry open the screen from the tablet.
    • Use a plastic spudger to pry open the screen from the tablet.

    • Work around the perimeter of the tablet going counter-clockwise.

  4. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  5. Open the tablet screen to the left.  (Like opening a book) Making sure not to disconnect any of the wires connecting  the screen and tablet.
    • Open the tablet screen to the left. (Like opening a book) Making sure not to disconnect any of the wires connecting the screen and tablet.

  6. To peel back the ribbon connector, first gently open the white gates.
    • To peel back the ribbon connector, first gently open the white gates.

    • You can do this with a plastic Spudger or your fingernail.

  7. Remove the screw that is highlighted.
    • Remove the screw that is highlighted.

    • Use a size #00 Philips head screwdriver.

  8. Remove the blue motherboard the screw was attached to.
    • Remove the blue motherboard the screw was attached to.

    • Make sure to remove it carefully, so you do not accidentally damage the surrounding parts.

  9. To remove the buttons, you need to push the little black tabs towards each other with either your fingernails or plastic spudger. While the tabs are pushed in the buttons should pop out. While the tabs are pushed in the buttons should pop out.
    • To remove the buttons, you need to push the little black tabs towards each other with either your fingernails or plastic spudger.

    • While the tabs are pushed in the buttons should pop out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Dylan Coleman

Miembro Desde 21/09/18

157 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 86