Introducción

Is your device struggling to load files and applications? Consider using this guide to replace the hard drive of your device.

Partes

No se requieren partes.

  1. Make sure to power down and turn off your device before proceeding with the repair.
    • Make sure to power down and turn off your device before proceeding with the repair.

    • Flip your laptop over so that the backside is facing you.

  2. Using a Phillips #1 screwdriver, remove the eight screws securing the backplate.
    • Using a Phillips #1 screwdriver, remove the eight screws securing the backplate.

    • Using the metal spudger, wedge it in the seam where the backplate meets the front plate and run the tool along the seam to separate the backplate.

    • Remove the back panel from the device.

    • Use the Phillips #1 screwdriver to remove the single screw securing the hard drive.

    • Use the metal spudger to lift the hard drive out of it's compartment.

    • Grab a hold of the hard drive and pull it straight out from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Terelle Montalvo

Miembro Desde 22/10/18

883 Reputación

8 Guías creadas

Equipo

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 9

Últimos 30 Días: 53

Todo El Tiempo: 94