Saltar al contenido principal

Introducción

Follow this guide to replace the fan on your Lenovo ThinkPad E540 laptop.

  1. Push the battery release switches away from each other. Push the battery release switches away from each other.
    • Push the battery release switches away from each other.

  2. Remove the battery.
    • Remove the battery.

  3. Remove the three 1.2mm Phillips #00 screws from the bottom panel.
    • Remove the three 1.2mm Phillips #00 screws from the bottom panel.

  4. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  5. Use a plastic opening tool to pry off the bottom panel.
    • Use a plastic opening tool to pry off the bottom panel.

  6. Heatsink and fan are connected. You have to remove both at the same time.
    • Heatsink and fan are connected. You have to remove both at the same time.

    • The heatsink and fan are found on the right side.

  7. Remove the two 1mm Phillips #0 screws from the fan.
    • Remove the two 1mm Phillips #0 screws from the fan.

    • Unscrew the four 2mm Phillips s#0 screws from the heatsink.

    • The screws on the heatsink will stay attached to it.

  8. To remove the  heatsink and fan, pull the fan upwards and  towards the center.
    • To remove the heatsink and fan, pull the fan upwards and towards the center.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Timothy Sumner

Miembro Desde 14/02/18

947 Reputación

8 Guías creadas

Equipo

USF Tampa, Team S2-G5, Nance Spring 2018 Miembro de USF Tampa, Team S2-G5, Nance Spring 2018

USFT-NANCE-S18S2G5

4 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 10

Últimos 30 Días: 40

Todo El Tiempo: 606