Repara tus cosas Comunidad Tienda

Lenovo ThinkPad Yoga 260 Repair Heat Sink Replacement

Introducción

The heat sink regulates the temperature of the laptop. If you have a faulty heat sink, this guide will show you how to replace it.

Qué necesitas

  1. Lenovo ThinkPad Yoga 260 Repair Heat Sink Replacement, Back Cover: paso 1, imagen 1 de 1

    • Ensure the device is off and unplugged.

    • Remove the stylus from its port and set aside.

    Editar

  2. Lenovo ThinkPad Yoga 260 Repair Heat Sink Replacement: paso 2, imagen 1 de 2 Lenovo ThinkPad Yoga 260 Repair Heat Sink Replacement: paso 2, imagen 2 de 2

    • Using a Phillips #1 screwdriver, gently unscrew the eight 1.3 mm Phillips #1 screws until you hear an audible click.

    • The screws will not separate from the bottom cover when loose.

    Editar

  3. Lenovo ThinkPad Yoga 260 Repair Heat Sink Replacement: paso 3, imagen 1 de 2 Lenovo ThinkPad Yoga 260 Repair Heat Sink Replacement: paso 3, imagen 2 de 2

    • The bottom cover is attached via several plastic clips located around the edges of the bottom cover.

    • Using a plastic opening tool, gently pry the bottom cover from the laptop.

    • Work the plastic opening tool around the edges of the bottom cover undoing all of the plastic clips, as shown in the picture.

    Editar

  5. Lenovo ThinkPad Yoga 260 Repair Heat Sink Replacement: paso 4, imagen 1 de 2 Lenovo ThinkPad Yoga 260 Repair Heat Sink Replacement: paso 4, imagen 2 de 2

    • Place your fingers around the edges of the cover and remove it.

    Editar

  6. Lenovo ThinkPad Yoga 260 Repair Heat Sink Replacement, Heat Sink: paso 5, imagen 1 de 2 Lenovo ThinkPad Yoga 260 Repair Heat Sink Replacement, Heat Sink: paso 5, imagen 2 de 2

    • Heatsink should be cool to the touch.

    • Using your index fingers, gently remove the fan’s power connection.

    Editar

  7. Lenovo ThinkPad Yoga 260 Repair Heat Sink Replacement: paso 6, imagen 1 de 2 Lenovo ThinkPad Yoga 260 Repair Heat Sink Replacement: paso 6, imagen 2 de 2

    • Using a Phillips #1 screwdriver, remove the four 1.3 mm Phillips #1 screws and set them aside.

    • The screws will not separate from the mounting when loose.

    Editar

  8. Lenovo ThinkPad Yoga 260 Repair Heat Sink Replacement: paso 7, imagen 1 de 1

    • Using your index finger and thumb, gently pry the cooler from its mountings and remove the assembly.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Daniel Fernandez

Miembro Desde 02/14/18

963 Reputación

5 Guías creadas

Insignias: 12

+ 9 más insignias

Equipo

USF Tampa, Team S2-G3, Eyestone Spring 2018 Miembro de USF Tampa, Team S2-G3, Eyestone Spring 2018

USFT-EYESTONE-S18S2G3

4 Miembros

5 Guías creadas

Un comentario

Good guide, thank you. Clear and concise with very easy to follow pictures and instruction. As usual, iFixit to the rescue :-)

Mark Taylor (wodin69) - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 8

Todo El Tiempo: 1,187