Repara tus cosas Comunidad Tienda

Lenovo Tab 2 A8 Volume & Power Button Sensor Replacement

Introducción

This replacement guide will describe how to remove the back cover on your device in order to access the volume and power buttons and button sensors. This guide also explains how to remove the existing button sensors before replacement.

Qué necesitas

  1. Lenovo Tab 2 A8 Volume & Power Button Sensor Replacement, Removing the Back Panel: paso 1, imagen 1 de 3 Lenovo Tab 2 A8 Volume & Power Button Sensor Replacement, Removing the Back Panel: paso 1, imagen 2 de 3 Lenovo Tab 2 A8 Volume & Power Button Sensor Replacement, Removing the Back Panel: paso 1, imagen 3 de 3

    • Place the tablet face down on a soft, stable surface that will protect the screen.

    • Next, Scrape off the seal over the screw in the back of the tablet with a Metal Spudger.

    • Use the Phillips #000 Screwdriver to remove the M1.4 × 2.5 screw.

    • If the seal covering the screw has already been removed, please proceed to the next step in the process.

    • As the screw is small, you may wish to extract it using a pair of tweezers.

    Editar

  3. Lenovo Tab 2 A8 Volume & Power Button Sensor Replacement: paso 2, imagen 1 de 3 Lenovo Tab 2 A8 Volume & Power Button Sensor Replacement: paso 2, imagen 2 de 3 Lenovo Tab 2 A8 Volume & Power Button Sensor Replacement: paso 2, imagen 3 de 3

    • Starting on the side, work your way around the the tablet to pop off the back cover. You will want to utilize a metal Spudger for this.

    • Some force may be required initially to pry the back cover off.

    • Note that the button tabs for this device are loose inside the case and will fall out when opening.

    Editar

  4. Lenovo Tab 2 A8 Volume & Power Button Sensor Replacement, Volume & Power Button Sensor: paso 3, imagen 1 de 2 Lenovo Tab 2 A8 Volume & Power Button Sensor Replacement, Volume & Power Button Sensor: paso 3, imagen 2 de 2

    • Use tweezers to gently lift the button panel away from the device. Be aware that pulling on the ribbon with too much force could tear the ribbon cable.

    • Carefully desolder the button strip contact point.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Taylor Smith

Miembro Desde 01/26/17

382 Reputación

2 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

IUPUI, Team 2-4, Baechle Spring 2017 Miembro de IUPUI, Team 2-4, Baechle Spring 2017

IUPUI-BAECHLE-S17S2G4

4 Miembros

9 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 2,703