Saltar al contenido principal

Lenovo Tab 2 A8 Front-Facing Camera Replacement

Qué necesitas

  1. Lenovo Tab 2 A8 Front-Facing Camera Replacement, Removing the Back Panel: paso 1, imagen 1 de 3 Lenovo Tab 2 A8 Front-Facing Camera Replacement, Removing the Back Panel: paso 1, imagen 2 de 3 Lenovo Tab 2 A8 Front-Facing Camera Replacement, Removing the Back Panel: paso 1, imagen 3 de 3
    • Place the tablet face down on a soft, stable surface that will protect the screen.

    • Next, Scrape off the seal over the screw in the back of the tablet with a Metal Spudger.

    • Use the Phillips #000 Screwdriver to remove the M1.4 × 2.5 screw.

    • If the seal covering the screw has already been removed, please proceed to the next step in the process.

    • As the screw is small, you may wish to extract it using a pair of tweezers.

  2. Lenovo Tab 2 A8 Front-Facing Camera Replacement: paso 2, imagen 1 de 3 Lenovo Tab 2 A8 Front-Facing Camera Replacement: paso 2, imagen 2 de 3 Lenovo Tab 2 A8 Front-Facing Camera Replacement: paso 2, imagen 3 de 3
    • Starting on the side, work your way around the the tablet to pop off the back cover. You will want to utilize a metal Spudger for this.

    • Some force may be required initially to pry the back cover off.

    • Note that the button tabs for this device are loose inside the case and will fall out when opening.

  3. Lenovo Tab 2 A8 Front-Facing Camera Replacement, Front-Facing Camera: paso 3, imagen 1 de 1
    • Using tweezers, peel off the anti-static sticker from the camera connection port.

  4. Lenovo Tab 2 A8 Front-Facing Camera Replacement: paso 4, imagen 1 de 1
    • Lift the camera out of its socket in the motherboard. Then, using tweezers to grasp the camera connector, carefully pull the connector horizontally out of the port.

    • Be aware that the camera connector will be firmly lodged in the port. When successfully removed, the top side of the port pops up.

  5. Lenovo Tab 2 A8 Front-Facing Camera Replacement: paso 5, imagen 1 de 1
    • Using tweezers to grasp the camera connector, lift the camera out of its socket.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 3

Todo El Tiempo: 1,015