Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Introducción

In order to remove and replace the power button on your tablet, a soldering iron will be needed.

Partes

No se especificaron partes.

  1. Use a plastic opening tool to pry open the back cover of the tablet. Use a plastic opening tool to pry open the back cover of the tablet.
    • Use a plastic opening tool to pry open the back cover of the tablet.

  2. Kits para Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits

    Kits para Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits
  3. The power button strip is only held in place by a small piece of double-sided tape.
    • The power button strip is only held in place by a small piece of double-sided tape.

    • Gently use the precision tweezers to separate the power button strip from the interior frame of the tablet.

  4. Be careful with the soldering iron to avoid injury.
    • Be careful with the soldering iron to avoid injury.

    • Remove the power button from the motherboard.

    • Use the soldering iron to heat up the connections. Gently pull away from the motherboard after connections are detached.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Equipo

USF Tampa, Team 12-6, Eyestone Spring 2016 Miembro de USF Tampa, Team 12-6, Eyestone Spring 2016

USFT-EYESTONE-S16S12G6

4 Miembros

10 Guías creadas

Thank you for making this helpfull instrutions.

Where i can get the Buttons?

Simon - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 22

Ultimos 30 días: 66

Todo El Tiempo: 3,835