Menú

Tus configuraciones

Mi Mesa de Trabajo

Obtén acceso rápido a guías, partes y respuestas para tus dispositivos
Mi Carrito

Al parecer tu carrito está vacío

Visita Nuestra Tienda

Lenovo Ideapad Flex 4-1570 Speakers Replacement

Escrito Por: Isaiah Vang (y 2 de otros participantes)
  • Comentarios: 2
  • Favoritos: 0

Dificultad

Moderar

Pasos

5

Tiempo Requerido

5 - 10 minutos

Secciones

2

Banderas

0

Introducción

If you have trouble listening to sounds on your laptop, and the audio sounds distorted, use this guide to replace your audio speakers.

Herramientas

Comprar estas herramientas

Partes

No se requieren partes.

  1. Turn off your laptop before you begin.

    • Turn off your laptop before you begin.

    Editar

  2. Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver. Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.

    • Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver.

    • Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.

    Editar

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

  4. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.

    • After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.

    Editar

  5. Lift up on each speaker, one by one. The speaker should lift up with ease. Lift up on each speaker, one by one. The speaker should lift up with ease.

    • Lift up on each speaker, one by one. The speaker should lift up with ease.

    Editar

  6. Unwind the speaker wire from the plastic brackets. Once you have the wire completely unwinded, use two blue iFixit tools to disconnect the speaker chip from the motherboard. Unwind the speaker wire from the plastic brackets. Once you have the wire completely unwinded, use two blue iFixit tools to disconnect the speaker chip from the motherboard.

    • Unwind the speaker wire from the plastic brackets. Once you have the wire completely unwinded, use two blue iFixit tools to disconnect the speaker chip from the motherboard.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Isaiah Vang

Miembro Desde 04/10/18

630 Reputación

6 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

UW Stout, Team S6-G6, Ogden Fall 2018 Miembro de UW Stout, Team S6-G6, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G6

4 Miembros

6 Guías creadas

0 Comentarios

Agregar un comentario
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 60