Introducción

If the laptop is lagging, and the mouse is slow to react, use this guide to replace your hard drive.

  1. Turn off your laptop before you begin.
    • Turn off your laptop before you begin.

  2. Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver. Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.
    • Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver.

    • Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.
    • After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.

  5. Remove the three 4 mm Philips screws circled in the picture using a T5 Torx Screwdriver. Remove the three 4 mm Philips screws circled in the picture using a T5 Torx Screwdriver.
    • Remove the three 4 mm Philips screws circled in the picture using a T5 Torx Screwdriver.

  6. Lift it upwards and pull out the hard drive.
    • Lift it upwards and pull out the hard drive.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Isaiah Vang

Miembro Desde 04/10/18

630 Reputación

6 Guías creadas

Equipo

UW Stout, Team S6-G6, Ogden Fall 2018 Miembro de UW Stout, Team S6-G6, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G6

4 Miembros

6 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 9

Todo El Tiempo: 83