Introducción

If the laptop is lagging, and the mouse is slow to react, use this guide to replace your hard drive.

  1. Turn off your laptop before you begin.
    • Turn off your laptop before you begin.

  2. Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver.
    • Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver.

    • Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.

    • After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.

    • Remove the three 4 mm Philips screws circled in the picture using a T5 Torx Screwdriver.

    • Lift it upwards and pull out the hard drive.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Isaiah Vang

Miembro Desde 04/10/18

630 Reputación

6 Guías creadas

Equipo

UW Stout, Team S6-G6, Ogden Fall 2018 Miembro de UW Stout, Team S6-G6, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G6

4 Miembros

6 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 24

Todo El Tiempo: 63