Repara tus cosas Comunidad Tienda

Lenovo Ideapad 330-15ARR Fan Assembly Replacement

Introducción

This guide is meant to detail the location and disassembly of the fan unit on the underside of the Lenovo Ideapad 330-15ARR.

Qué necesitas

  1. Lenovo Ideapad 330-15ARR Fan Assembly Replacement, Lower Case: paso 1, imagen 1 de 1

    • Remove all Phillips #0 screws securing the case to the laptop.

    Editar

  2. Lenovo Ideapad 330-15ARR Fan Assembly Replacement: paso 2, imagen 1 de 2 Lenovo Ideapad 330-15ARR Fan Assembly Replacement: paso 2, imagen 2 de 2

    • Pry all edges off of the laptop with the opening tool until the lower case releases.

    • Remove the lower case.

    Editar

  4. Lenovo Ideapad 330-15ARR Fan Assembly Replacement, Fan Assembly: paso 3, imagen 1 de 2 Lenovo Ideapad 330-15ARR Fan Assembly Replacement, Fan Assembly: paso 3, imagen 2 de 2

    • Unscrew all three captive screws attaching the heat sink to the motherboard with a Phillips #0 screwdriver.

    • These screws stay attached to the heatsink, so do not attempt to remove them.

    Editar

  5. Lenovo Ideapad 330-15ARR Fan Assembly Replacement: paso 4, imagen 1 de 2 Lenovo Ideapad 330-15ARR Fan Assembly Replacement: paso 4, imagen 2 de 2

    • Remove the three Phillips #0 screws securing the fan assembly.

    Editar

  6. Lenovo Ideapad 330-15ARR Fan Assembly Replacement: paso 5, imagen 1 de 3 Lenovo Ideapad 330-15ARR Fan Assembly Replacement: paso 5, imagen 2 de 3 Lenovo Ideapad 330-15ARR Fan Assembly Replacement: paso 5, imagen 3 de 3

    • Take the wires in your hand, and firmly but gently pull it out of its port.

    • Lift the fan assembly out of the device.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 7

Ultimos 30 días: 18

Todo El Tiempo: 312