Saltar al contenido principal

Introducción

If you are experiencing troubles with your fan and it needs to be replaced you can locate it inside the laptop.

  1. Before you proceed, make sure your computer is turned off and is not connected to any power source.
    • Before you proceed, make sure your computer is turned off and is not connected to any power source.

    • Orient the laptop in such a way that the bottom is facing up and the optical drive is facing to the left of yourself.

  2. Remove the 7mm Phillips #1 screw. Be sure to store the screws carefully as they are easy to lose. A magnetic project mat is recommended
    • Remove the 7mm Phillips #1 screw.

    • Be sure to store the screws carefully as they are easy to lose. A magnetic project mat is recommended

  3. Carefully remove the optical drive bracket by pulling the bezel away from the laptop. Carefully remove the optical drive bracket by pulling the bezel away from the laptop. Carefully remove the optical drive bracket by pulling the bezel away from the laptop.
    • Carefully remove the optical drive bracket by pulling the bezel away from the laptop.

  4. Using the Phillips #1 screwdriver, remove the twelve screws around the back panel from the laptop. Using the Phillips #1 screwdriver, remove the twelve screws around the back panel from the laptop.
    • Using the Phillips #1 screwdriver, remove the twelve screws around the back panel from the laptop.

  5. Use an opening tool to pry out the  back cover. Use an opening tool to pry out the  back cover. Use an opening tool to pry out the  back cover.
    • Use an opening tool to pry out the back cover.

  6. Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora

    Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora
  7. Remove the back panel by pulling it up and away from the laptop. Remove the back panel by pulling it up and away from the laptop. Remove the back panel by pulling it up and away from the laptop.
    • Remove the back panel by pulling it up and away from the laptop.

  8. Remove the four 6mm screws using the Phillips #1 screwdriver.
    • Remove the four 6mm screws using the Phillips #1 screwdriver.

  9. Remove the connector attaching the battery to the motherboard. When removing the connector, make sure it is in the parallel direction so it doesn't damage the motherboard. When removing the connector, make sure it is in the parallel direction so it doesn't damage the motherboard.
    • Remove the connector attaching the battery to the motherboard.

    • When removing the connector, make sure it is in the parallel direction so it doesn't damage the motherboard.

  10. Disconnect black and grey wires by simply giving them a light tug. Disconnect black and grey wires by simply giving them a light tug.
    • Disconnect black and grey wires by simply giving them a light tug.

  11. Remove  the 6mm Phillips #1  screw connecting the fan to the laptop.
    • Remove the 6mm Phillips #1 screw connecting the fan to the laptop.

  12. Lift the fan slightly and straight upward and unwind the black and grey wires from the fan. Lift the fan slightly and straight upward and unwind the black and grey wires from the fan. Lift the fan slightly and straight upward and unwind the black and grey wires from the fan.
    • Lift the fan slightly and straight upward and unwind the black and grey wires from the fan.

  13. Identify the red, black, yellow, and brown wire coming from the back of the fan connecting  to the motherboard with a white  connector piece.
    • Identify the red, black, yellow, and brown wire coming from the back of the fan connecting to the motherboard with a white connector piece.

  14. Slowly pull and wiggle the white connector piece until it comes loose from the laptop. Slowly pull and wiggle the white connector piece until it comes loose from the laptop.
    • Slowly pull and wiggle the white connector piece until it comes loose from the laptop.

  15. Replace the new fan.
    • Replace the new fan.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 39

Todo El Tiempo: 329