Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

When your laptop screen cracks the repairs and replacements can be costly. This guide will show you how to replace the Lenovo IdeaPad Y410p screen while saving hundreds of dollars.

Partes

No se especificaron partes.

  1. Turn off your laptop before starting.
    • Turn off your laptop before starting.

    • Flip the laptop over so the model stickers are facing up.

  2. Slide the left battery lock to the unlock position and release. Slide the right battery lock to the unlock positon and hold it in place.
    • Slide the left battery lock to the unlock position and release.

    • Slide the right battery lock to the unlock positon and hold it in place.

  3. ABRIR TODAS LAS PESTAÑAS

    Kits de actualización de RAM para Mac

    Compra kits

    Suficiente RAM
    para todas las pestañas

    Compra kits
  4. While holding the right battery lock in the unlock position, slide the battery carefully out of the laptop and set it aside. While holding the right battery lock in the unlock position, slide the battery carefully out of the laptop and set it aside.
    • While holding the right battery lock in the unlock position, slide the battery carefully out of the laptop and set it aside.

  5. Using the metal spudger, pry the screen cover off from all sides. Carefully lift the screen cover up and outwards.
    • Using the metal spudger, pry the screen cover off from all sides.

    • Carefully lift the screen cover up and outwards.

    • Place the screen cover aside.

  6. Using the Phillips #0 screwdriver, remove the four 8mm screws from each corner of the screen. Carefully lift the screen up and place it face down on the keyboard. A thick cord connects the  bottom of the screen to the computer. Do not tug or remove this cord from the computer.
    • Using the Phillips #0 screwdriver, remove the four 8mm screws from each corner of the screen.

    • Carefully lift the screen up and place it face down on the keyboard.

    • A thick cord connects the bottom of the screen to the computer. Do not tug or remove this cord from the computer.

  7. Remove the adhesive tape from the small rectangular connector at the bottom of the screen. Carefully pull the wire connector from the screen connector.
    • Remove the adhesive tape from the small rectangular connector at the bottom of the screen.

    • Carefully pull the wire connector from the screen connector.

    • Remove the screen.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 144