Saltar al contenido principal

Introducción

Use this guide to replace the motherboard of your laptop.

Partes

No se especificaron partes.

  1. Make sure the laptop is upside down, then turn the laptop so that the battery is facing you. Now that the battery is facing you, there will be two locks, one on the left and one on the right. Slide the lock to the right until you can hear a "click". Once you hear this click, you should be able to see the color red. Slide the lock to the right until you can hear a "click". Once you hear this click, you should be able to see the color red.
    • Make sure the laptop is upside down, then turn the laptop so that the battery is facing you. Now that the battery is facing you, there will be two locks, one on the left and one on the right.

    • Slide the lock to the right until you can hear a "click". Once you hear this click, you should be able to see the color red.

  2. Unlike the first lock, the left lock does not stay in place. You will need to hold it in place as you take the battery out. Slide the second (left) lock to the left and hold it there.
    • Unlike the first lock, the left lock does not stay in place. You will need to hold it in place as you take the battery out.

    • Slide the second (left) lock to the left and hold it there.

  3. Gently pull the battery out.
    • Gently pull the battery out.

  4. Remove the eight 9mm screws with a Phillips #0 screwdriver.
    • Remove the eight 9mm screws with a Phillips #0 screwdriver.

  5. Use the plastic opening tool to remove the back panel from the device. Be careful not to force the back off, as you may break the clips keeping it down. Be careful not to force the back off, as you may break the clips keeping it down.
    • Use the plastic opening tool to remove the back panel from the device.

    • Be careful not to force the back off, as you may break the clips keeping it down.

  6. Move the lock down until you see red and hear a slight click. Move the lock down until you see red and hear a slight click.
    • Move the lock down until you see red and hear a slight click.

  7. Hold this lock down while removing the optical drive. Hold this lock down while removing the optical drive. Hold this lock down while removing the optical drive.
    • Hold this lock down while removing the optical drive.

  8. Unscrew the screws using a Phillips #0 screwdriver.
    • Unscrew the screws using a Phillips #0 screwdriver.

    • Unplug the wireless adapter to fully remove the motherboard.

    • If you don't want to break any of the parts you might want to take out the RAM, SSD, and the Hard Drive.

    • Screw sizes will be 4mm and 9mm

  9. Use the plastic opening tool to take off the front panel. Unplug the blue wire to remove the front panel. Unplug the blue wire to remove the front panel.
    • Use the plastic opening tool to take off the front panel.

    • Unplug the blue wire to remove the front panel.

  10. Fully remove the front panel.
    • Fully remove the front panel.

    • Unscrew the 9mm and 4mm screws (there is one of each screw).

  11. After unscrewing the screws, remove the motherboard. After unscrewing the screws, remove the motherboard.
    • After unscrewing the screws, remove the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 11

Todo El Tiempo: 221