Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two 14mm Phillips #1 screws that attach the keyboard to the underside of the laptop.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the laptop over and open it as you would to use it.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using your hands, lift the top corner of the keyboard, and keep lifting until the keyboard pops out. You will hear clicks as you do this.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the top of the keyboard and flip the keyboard face down so that you can access the connectors underneath it.
-
Using your fingers, unplug the large connector that connects the keyboard to the center of the laptop by sliding the end of the strip out of the socket.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using your fingers, unplug the second, smaller connector, located at the lower left hand side of the keyboard by sliding the strip out of the socket.
-