Repara tus cosas Comunidad Tienda

Lenovo IdeaPad Flex 5-1470 Motherboard Replacement

Introducción

This is a guide for how to replace a Lenovo IdeaPad Flex 5-1470 motherboard. Common reasons to replace the motherboard are because of overheating, power surges, old age or just overuse.

Qué necesitas

  1. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement, Back Panel: paso 1, imagen 1 de 1

    • Remove all ten 6.6 mm screws with a Phillips #00 screwdriver.

    Editar

  2. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: paso 2, imagen 1 de 2 Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: paso 2, imagen 2 de 2

    • Use the plastic opening tool to lift up and remove the casing.

    Editar

  4. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement, SSD: paso 3, imagen 1 de 1

    • Remove the single 3.6 mm screw using a Phillips #00 screwdriver.

    • The SSD will pop up on its own after removing the screw.

    Editar

  5. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement, Motherboard: paso 4, imagen 1 de 3 Lenovo IdeaPad Flex 5-1470 Motherboard Replacement, Motherboard: paso 4, imagen 2 de 3 Lenovo IdeaPad Flex 5-1470 Motherboard Replacement, Motherboard: paso 4, imagen 3 de 3

    • Use a Phillips #00 screwdriver to remove the three screws securing the fan.

    • Lift the fan up and out.

    • Use a Phillips #00 screwdriver to remove the three screws securing the hard drive.

    • Lift the hard drive up and out.

    Editar

  6. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: paso 5, imagen 1 de 2 Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: paso 5, imagen 2 de 2

    • Use a Phillips #00 screwdriver to remove the single screw securing the Wi-Fi card.

    • The Wi-Fi card will slightly lift away from the motherboard.

    • Pull the Wi-Fi card directly out of its port.

    Editar

  7. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: paso 6, imagen 1 de 2 Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: paso 6, imagen 2 de 2

    • Use a Phillips #00 screwdriver to remove the three screws securing the motherboard.

    • Gently disconnect the cables and ribbon cables connected to the motherboard.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 13

Ultimos 30 días: 30

Todo El Tiempo: 409