Introducción

If your laptop is not holding a charge like it is intended to, then it may be due to your battery.

Partes

No se requieren partes.

  1. Flip laptop over so the model sticker is showing, and begin to unscrew all of the screws.
    • Flip laptop over so the model sticker is showing, and begin to unscrew all of the screws.

  2. Pop off the back panel using a plastic opening tool once all screws are removed.
    • Pop off the back panel using a plastic opening tool once all screws are removed.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Once the panel is fully removed, begin to unscrew the battery.
    • Once the panel is fully removed, begin to unscrew the battery.

  5. Use the iFixit Opening tool to disconnect the battery from the circuit board. When all screws are removed from the battery, carefully lift the battery up.
    • Use the iFixit Opening tool to disconnect the battery from the circuit board.

    • When all screws are removed from the battery, carefully lift the battery up.

  6. The battery is completely removed, and can be replaced with a new battery.
    • The battery is completely removed, and can be replaced with a new battery.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 5

Últimos 30 Días: 27

Todo El Tiempo: 160