Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Lenovo IdeaPad 110-15ISK Cooling Fan Replacement

Qué necesitas

  1. Lenovo IdeaPad 110-15ISK Cooling Fan Replacement, Keyboard: paso 1, imagen 1 de 1
    • Flip the IdeaPad bottom side up.

    • Using a Phillips #1 screwdriver, remove the two 6.0mm screws on the back panel, that hold the keyboard.

    • Flip the computer back to top facing.

  2. Lenovo IdeaPad 110-15ISK Cooling Fan Replacement: paso 2, imagen 1 de 1
    • Open the lid.

    • Use the plastic opening tool to pry the keyboard up and away from the bottom assembly.

  3. Lenovo IdeaPad 110-15ISK Cooling Fan Replacement: paso 3, imagen 1 de 1
    • Next disconnect the keyboard cable by using the tip of the spudger or your finger to lightly push out the ribbon from the contact port.

    • Completely remove the keyboard from the bottom assembly.

    • Unlock the ZIF conector before pulling the cable out

  4. Lenovo IdeaPad 110-15ISK Cooling Fan Replacement, Optical Drive: paso 5, imagen 1 de 1
    • Using a Phillips #1 screwdriver, unscrew the one 5.0mm screw on the back panel.

  5. Lenovo IdeaPad 110-15ISK Cooling Fan Replacement: paso 6, imagen 1 de 1
    • Flip the laptop to its back and the optical drive is located at the top left corner.

    • Remove the optical CD DVD drive by lightly pulling it out of the assembly.

  6. Lenovo IdeaPad 110-15ISK Cooling Fan Replacement, Upper Case: paso 7, imagen 1 de 1
    • Place the laptop bottom facing up.

    • Using a Phillips #1 screwdriver, remove the remaining eight 6.0mm screws on the back panel.

    • Flip the computer back to top facing.

  7. Lenovo IdeaPad 110-15ISK Cooling Fan Replacement: paso 8, imagen 1 de 1
    • Separate the top case from the bottom using a plastic opening tool.

    • Continue prying the top and bottom case from each other all around the perimeter of the laptop.

  8. Lenovo IdeaPad 110-15ISK Cooling Fan Replacement, Cooling Fan: paso 9, imagen 1 de 2 Lenovo IdeaPad 110-15ISK Cooling Fan Replacement, Cooling Fan: paso 9, imagen 2 de 2
    • On the back panel, the cooling fan is located at the top right.

    • Unscrew the 6.0mm screw using the Phillips #1 screwdriver.

    • Push the plastic piece towards the direction the wires are in with the tweezers to completely disconnect it from the back panel.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Jakub Szark

Miembro Desde 10/17/18

513 Reputación

5 Guías creadas

Equipo

UW Tacoma, Team S1-G5, Rose Fall 2018 Miembro de UW Tacoma, Team S1-G5, Rose Fall 2018

UWT-ROSE-F18S1G5

4 Miembros

39 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 3

Ultimos 30 días: 14

Todo El Tiempo: 1,662