Repara tus cosas Comunidad Tienda

Lenovo IdeaPad 100s-14IBR Hard Drive/ Solid State Drive Replacement

Introducción

This guide demonstrates how to remove the SSD from the Lenovo IdeaPad 100S-141BR. In cases of hard drive or SSD issues, either failure to boot or internal damage, removing the defective hardware may be necessary. The removal process is simple and requires little to no experience to complete. Before beginning the repair process, power down the device and remove any external peripherals or charging cords.

Qué necesitas

  1. Lenovo IdeaPad 100s-14IBR Hard Drive/ Solid State Drive Replacement, Hard Drive/ Solid State Drive: paso 1, imagen 1 de 1

    • Remove the eight 4mm PH00 screws.

    • Remove the four 2mm PH00 screws.

    Editar

  2. Lenovo IdeaPad 100s-14IBR Hard Drive/ Solid State Drive Replacement: paso 2, imagen 1 de 2 Lenovo IdeaPad 100s-14IBR Hard Drive/ Solid State Drive Replacement: paso 2, imagen 2 de 2

    • Use the nylon spudger to loosen the back cover from the back of the device.

    • You may hear a bit of a snapping sound, but this is normal.

    Editar

  3. Lenovo IdeaPad 100s-14IBR Hard Drive/ Solid State Drive Replacement: paso 3, imagen 1 de 1

    • For safety reasons, disconnect the wires connecting the battery to the motherboard with a nylon spudger.

    Editar

  4. Lenovo IdeaPad 100s-14IBR Hard Drive/ Solid State Drive Replacement: paso 4, imagen 1 de 1

    • Remove the solid state drive.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

3 comentarios

WHAT DO i REPLACE THE ssd WITH ONCE REMOVED? I WANT TO UPGRADE TO A 1TB DRIVE. WHAT DO YOU SUGGEST FOR MY LENOVO 110S-141BR LAPTOP?

ROBERT GOFFINSKI - Contestar

I replaced with an ssd but the laptop is not recognizing it

Janet Zinabe - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 23

Ultimos 30 días: 127

Todo El Tiempo: 14,855