Saltar al contenido principal

Lenovo IdeaCentre K410 USB 3.0 Expansion Card Replacement

Qué necesitas

  1. Lenovo IdeaCentre K410 USB 3.0 Expansion Card Replacement, Side Panel: paso 1, imagen 1 de 1
    • Lay the computer down on its side as shown.

    • Remove the two 14mm screws shown. The screws are loose enough to unscrew with your hands.

  2. Lenovo IdeaCentre K410 USB 3.0 Expansion Card Replacement: paso 2, imagen 1 de 1
    • Gently slide the side panel straight back and remove from the computer.

  3. Lenovo IdeaCentre K410 USB 3.0 Expansion Card Replacement, USB 3.0 Expansion Card: paso 3, imagen 1 de 1
    • With your hands remove the 14mm screw that holds the cover on the back panel.

    • Gently pull the flap back to expose the expansion card retaining screw.

  4. Lenovo IdeaCentre K410 USB 3.0 Expansion Card Replacement: paso 4, imagen 1 de 1
    • Use the Phillips #2 to remove the 8mm screw that holds the USB 3.0 Expansion Card in place.

  5. Lenovo IdeaCentre K410 USB 3.0 Expansion Card Replacement: paso 5, imagen 1 de 1
    • With moderate force, pull straight up on the expansion card to remove it from the computer.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Timothy Grebe

Miembro Desde 10/19/14

1,634 Reputación

9 Guías creadas

Equipo

Cal Poly, Team 10-39, Amido Fall 2014 Miembro de Cal Poly, Team 10-39, Amido Fall 2014

CPSU-AMIDO-F14S10G39

4 Miembros

18 Guías creadas

Un comentario

Why is a USB 3.1 Gen 1 adapter card called TV Tuner? It is an adapter card. What you connect to it is irelevant.

TheLOD2010 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 4

Ultimos 30 días: 9

Todo El Tiempo: 1,114