Repara tus cosas Comunidad Tienda

Lenovo IdeaCentre K410 CPU Replacement

Qué necesitas

  1. Lenovo IdeaCentre K410 CPU Replacement, Side Panel: paso 1, imagen 1 de 1

    • Lay the computer down on its side as shown.

    • Remove the two 14mm screws shown. The screws are loose enough to unscrew with your hands.

    Editar

  2. Lenovo IdeaCentre K410 CPU Replacement: paso 2, imagen 1 de 1

    • Gently slide the side panel straight back and remove from the computer.

    Editar

  4. Lenovo IdeaCentre K410 CPU Replacement, CPU Fan: paso 3, imagen 1 de 1

    • Using the Phillips #00 Precision screwdriver, unscrew the four 12mm screws that hold the fan in place.

    • Be careful not to strip the screws.

    Editar

  5. Lenovo IdeaCentre K410 CPU Replacement: paso 4, imagen 1 de 1

    • Unplug the fan from the motherboard by gently pulling out the single plug. Then lift the fan up and out of the computer.

    Editar

  6. Lenovo IdeaCentre K410 CPU Replacement, Heat Sink: paso 5, imagen 1 de 1

    • Loosen the four screws that hold the heat sink in place using a Phillips #2 screwdriver.

    • The screws do not come all the way out of the heat sink

    • Pull the heat sink straight up to remove it.

    Editar

  7. Lenovo IdeaCentre K410 CPU Replacement, CPU: paso 6, imagen 1 de 2 Lenovo IdeaCentre K410 CPU Replacement, CPU: paso 6, imagen 2 de 2

    • Remove the 2 8mm screws holding the CPU cover using a Torx #20 screwdriver.

    • Remove the 11 mm screw using a Torx #20 screwdriver.

    • Remove the cover and remove the CPU by gently pulling upward.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

15 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Timothy Grebe

Miembro Desde 10/19/14

1,634 Reputación

9 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

Cal Poly, Team 10-39, Amido Fall 2014 Miembro de Cal Poly, Team 10-39, Amido Fall 2014

CPSU-AMIDO-F14S10G39

4 Miembros

18 Guías creadas

Un comentario

Why would you remove the fan and the CPU fixation bracket when you could just remove the heatsink by unscrewing it and then lift up the bracket lever...

alphaLONE - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 11

Ultimos 30 días: 33

Todo El Tiempo: 3,801