Introducción

This guide can be used if the optical drive is malfunctioning. Removing the optical drive is also required before the main cover can be opened up.

Partes

No se requieren partes.

  1. Remove the three 6mm Phillips #0 screws holding the back access panel on.
    • Remove the three 6mm Phillips #0 screws holding the back access panel on.

  2. Slide the cover toward you to unlatch it.
    • Slide the cover toward you to unlatch it.

    • The edge of the panel will slide away from the laptop so it can be lifted.

    • Remove one 6mm Phillips #0 screw holding in the optical drive.

    • Grab the optical drive by the edge and pull it out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 32

Últimos 30 Días: 56

Todo El Tiempo: 75