Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Many of the replacement guides for this model will be internal parts that are accessed by first removing the back access panel. Removing this part is very simple; the only tool needed is a small Philips screwdriver to remove three screws. Removing this part gives access necessary for future guides.

Partes

No se especificaron partes.

  1. Remove the three 6mm Phillips #0 screws holding the back access panel on. Remove the three 6mm Phillips #0 screws holding the back access panel on.
    • Remove the three 6mm Phillips #0 screws holding the back access panel on.

  2. El kit de herramientas esencial

    Las herramientas más útiles en nuestro kit más compacto.

    Compra ahora

    El kit de herramientas esencial

    Las herramientas más útiles en nuestro kit más compacto.

    Compra ahora
  3. Slide the cover toward you to unlatch it. The edge of the panel will slide away from  the  laptop so it can be lifted.
    • Slide the cover toward you to unlatch it.

    • The edge of the panel will slide away from the laptop so it can be lifted.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 11

Ultimos 30 días: 39

Todo El Tiempo: 956