Introducción

This part of the laptop allows access to most components that the other guides replace. This is a necessary step to complete in order to replace those further components. Underneath the back cover you will find the motherboard, hard drive, RAM, and processor.

Partes

No se requieren partes.

  1. Turn the laptop over so that the bottom side is facing up.
    • Turn the laptop over so that the bottom side is facing up.

  2. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  3. Unscrew the five 5mm Phillips #0 screws that hold the cover in place.
    • Unscrew the five 5mm Phillips #0 screws that hold the cover in place.

    • The screws do not come out fully from the back plate. They stay attached to the plate itself.

  4. With the screws removed, insert the plastic opening tool into the groove located on the right side. Begin to pry up, and the plate should lift up from the body of the laptop. While lifting up, take the piece in one hand and pull up and to the right to fully remove the back plate.
    • With the screws removed, insert the plastic opening tool into the groove located on the right side.

    • Begin to pry up, and the plate should lift up from the body of the laptop.

    • While lifting up, take the piece in one hand and pull up and to the right to fully remove the back plate.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Justin Bickford

Miembro Desde 01/03/18

311 Reputación

2 Guías creadas

Equipo

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 8

Todo El Tiempo: 169