Saltar al contenido principal

Introducción

This guide will show you how to replace the screen on a Lenovo ThinkPad Edge E431 laptop.

  1. Remove the 2mm Phillips #00 screw from the battery cover. Lift the battery cover out of its slot.
    • Remove the 2mm Phillips #00 screw from the battery cover.

    • Lift the battery cover out of its slot.

  2. Disconnect the battery cable.
    • Disconnect the battery cable.

  3. Use the pointed end of a spudger to remove the two screw covers from the bottom corners of the display.
    • Use the pointed end of a spudger to remove the two screw covers from the bottom corners of the display.

  4. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  5. Remove the two 2mm Phillips #00 screws found at the bottom corners of the display.
    • Remove the two 2mm Phillips #00 screws found at the bottom corners of the display.

  6. Separate the front bezel from the display using the plastic opening tool.
    • Separate the front bezel from the display using the plastic opening tool.

  7. Remove the four 2mm Phillips #00 screws from the screen.
    • Remove the four 2mm Phillips #00 screws from the screen.

  8. Lay the screen flat on top of the keyboard. Lay the screen flat on top of the keyboard.
    • Lay the screen flat on top of the keyboard.

  9. Peel up the adhesive tape to unlatch the metal retaining bracket on the display cable. Peel up the adhesive tape to unlatch the metal retaining bracket on the display cable.
    • Peel up the adhesive tape to unlatch the metal retaining bracket on the display cable.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 4

Últimos 30 Días: 18

Todo El Tiempo: 338