Introducción
USe this guide to replace the tripod socket.
Qué necesitas
-
-
-
Carefully unscrew the four Phillips #0 screws on the bottom of the camera.
Pregunta a FixBot
-
-
-
-
Open the back door on the camera by pushing down on the door latch.
-
-
-
Apply pressure to the bottom plate and it will pop off.
-
From here, you can replace the bottom plate, or continue on to further steps.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
Equipo
Cal Poly, Team 18-19, Garner Spring 2011 Miembro de Cal Poly, Team 18-19, Garner Spring 2011
CPSU-GARNER-S11S18G19
Miembros de 4
60 Guías creadas
