Introducción
Use this guide to replace the Flash Diffuser.
Qué necesitas
-
-
Carefully unscrew the four Phillips #0 screws on the bottom of the camera.
-
-
-
Open the back door on the camera by pushing down on the door latch.
-
-
-
Apply pressure to the bottom plate and it will pop off.
-
From here, you can replace the bottom plate, or continue on to further steps.
-
-
-
-
Now that you've removed the bottom plate, you can pull apart the front and back covers.
-
Start with the front cover and, by applying pressure (perhaps a lot of pressure), snap off the front cover.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.