Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip over device so that back portion of the device is facing you.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the one 10mm screw that holds the battery cover in place with a a PH1 phillips head screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully pry the batteries out with a plastic opening tool prying from the non spring side.
-
Remove the three AA batteries.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the eleven 10mm screws from the back of the device with a a PH1 phillips head screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the two 7.5 mm screws to the left and right of the speaker with a PH1 phillips head screwdriver.
-
Remove the cover and place to the side.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once the cover is removed, gently lift up the speaker making sure not to rip or break the wires.
-
Gently turn the speaker over and carefully desolder the white and yellow wires from the speaker.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.
5 comentarios
I agree, but I also second the question...where can I buy a replacement speaker?
Where could I buy the replacement speaker in Malaysia?
Where can I buy replacement speaker in Malaysia? Appreciate yr reply