Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

This guide is designed to instruct users on how properly replace dead or low batteries in the device. Tools will be necessary as well as new AA batteries.

Partes

No se especificaron partes.

  1. Flip over device so that back portion of the device is facing you.
    • Flip over device so that back portion of the device is facing you.

  2. Unscrew the one 10mm screw that holds the battery cover in place with a a PH1 phillips head screwdriver.
    • Unscrew the one 10mm screw that holds the battery cover in place with a a PH1 phillips head screwdriver.

    • Please note that the screw cannot be removed as it is attached to the battery cover.

  3. Carefully pry the batteries out with a plastic opening tool prying from the non spring side. Remove the three AA batteries.
    • Carefully pry the batteries out with a plastic opening tool prying from the non spring side.

    • Remove the three AA batteries.

    • Note the direction of the batteries for when reassembling.

Linea de Meta

Una persona más ha completado esta guía.

Jonathan Fitzer

Miembro Desde 10/02/16

563 Reputación

3 Guías creadas

Equipo

USF Tampa, Team 14-6, Lacy Spring 2016 Miembro de USF Tampa, Team 14-6, Lacy Spring 2016

USFT-LACY-S16S14G6

4 Miembros

6 Guías creadas

Hi Jonathan! Your article is very helpful. But I have a big question now. I have opened the leaptop and see that membrane should be replaced. But where can I buy the membrane separately? Please help!

Alina Timchenko - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 14

Todo El Tiempo: 1,447