Saltar al contenido principal

Leapfrog LeapPad 3 Speaker Replacement

Qué necesitas

  1. Leapfrog LeapPad 3 Speaker Replacement, Battery: paso 1, imagen 1 de 3 Leapfrog LeapPad 3 Speaker Replacement, Battery: paso 1, imagen 2 de 3 Leapfrog LeapPad 3 Speaker Replacement, Battery: paso 1, imagen 3 de 3
    Herramienta utilizada en este paso:
    Anti-Static Wrist Strap
    $7.95
    Comprar
    • Before taking apart your device, ensure that it is turned off and that your anti-static wrist strap is secured to a ground.

    • Remove the six 10.0 mm Phillips #0 screws from the outer case and remove the cover with your hands.

    • You will not need to pry the case off.

  2. Leapfrog LeapPad 3 Speaker Replacement: paso 2, imagen 1 de 3 Leapfrog LeapPad 3 Speaker Replacement: paso 2, imagen 2 de 3 Leapfrog LeapPad 3 Speaker Replacement: paso 2, imagen 3 de 3
    • Unplug the battery from the motherboard with your hands.

    • The battery sits to the right of the motherboard.

  3. Leapfrog LeapPad 3 Speaker Replacement: paso 3, imagen 1 de 2 Leapfrog LeapPad 3 Speaker Replacement: paso 3, imagen 2 de 2
    • Pry the battery gently off of the plastic platform with an opening tool.

    • Do not to puncture the battery, as the material inside can be dangerous.

  4. Leapfrog LeapPad 3 Speaker Replacement, Speaker: paso 4, imagen 1 de 2 Leapfrog LeapPad 3 Speaker Replacement, Speaker: paso 4, imagen 2 de 2
    • Disconnect the audio cord from the motherboard using a plastic opening tool.

    • When re-plugging this cord be sure it is flush with the slot, otherwise the speaker and directional pad will malfunction.

    • Use caution when unplugging, and re-plugging the ribbon cord as they are fragile.

  5. Leapfrog LeapPad 3 Speaker Replacement: paso 5, imagen 1 de 3 Leapfrog LeapPad 3 Speaker Replacement: paso 5, imagen 2 de 3 Leapfrog LeapPad 3 Speaker Replacement: paso 5, imagen 3 de 3
    • Unscrew the five 6.0 mm phillips head screws from the board containing the audio jack and directional pad.

  6. Leapfrog LeapPad 3 Speaker Replacement: paso 6, imagen 1 de 3 Leapfrog LeapPad 3 Speaker Replacement: paso 6, imagen 2 de 3 Leapfrog LeapPad 3 Speaker Replacement: paso 6, imagen 3 de 3
    • Unscrew the three 6.5 mm phillips head screws holding down the speaker to the right of the audio jack.

    • Remove the board and speaker from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Matt Irvine

Miembro Desde 02/04/16

952 Reputación

6 Guías creadas

Equipo

USF Tampa, Team 16-2, Blackwell Winter 2016 Miembro de USF Tampa, Team 16-2, Blackwell Winter 2016

USFT-BLACKWELL-W16S16G2

3 Miembros

12 Guías creadas

Un comentario

Where can I purchase a replacement audio board /speaker for the LeapPad3?

lizchilds - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 854