Saltar al contenido principal

Leapfrog LeapPad 3 Display Assembly Replacement

Qué necesitas

Resumen del Video

  1. Leapfrog LeapPad 3 Display Assembly Replacement, Battery: paso 1, imagen 1 de 3 Leapfrog LeapPad 3 Display Assembly Replacement, Battery: paso 1, imagen 2 de 3 Leapfrog LeapPad 3 Display Assembly Replacement, Battery: paso 1, imagen 3 de 3
    Herramienta utilizada en este paso:
    Anti-Static Wrist Strap
    $7.95
    Comprar
    • Before taking apart your device, ensure that it is turned off and that your anti-static wrist strap is secured to a ground.

    • Remove the six 10.0 mm Phillips #0 screws from the outer case and remove the cover with your hands.

    • You will not need to pry the case off.

  2. Leapfrog LeapPad 3 Display Assembly Replacement: paso 2, imagen 1 de 3 Leapfrog LeapPad 3 Display Assembly Replacement: paso 2, imagen 2 de 3 Leapfrog LeapPad 3 Display Assembly Replacement: paso 2, imagen 3 de 3
    • Unplug the battery from the motherboard with your hands.

    • The battery sits to the right of the motherboard.

  3. Leapfrog LeapPad 3 Display Assembly Replacement: paso 3, imagen 1 de 2 Leapfrog LeapPad 3 Display Assembly Replacement: paso 3, imagen 2 de 2
    • Pry the battery gently off of the plastic platform with an opening tool.

    • Do not to puncture the battery, as the material inside can be dangerous.

  4. Leapfrog LeapPad 3 Display Assembly Replacement, Speaker: paso 4, imagen 1 de 2 Leapfrog LeapPad 3 Display Assembly Replacement, Speaker: paso 4, imagen 2 de 2
    • Disconnect the audio cord from the motherboard using a plastic opening tool.

    • When re-plugging this cord be sure it is flush with the slot, otherwise the speaker and directional pad will malfunction.

    • Use caution when unplugging, and re-plugging the ribbon cord as they are fragile.

  5. Leapfrog LeapPad 3 Display Assembly Replacement: paso 5, imagen 1 de 3 Leapfrog LeapPad 3 Display Assembly Replacement: paso 5, imagen 2 de 3 Leapfrog LeapPad 3 Display Assembly Replacement: paso 5, imagen 3 de 3
    • Unscrew the five 6.0 mm phillips head screws from the board containing the audio jack and directional pad.

  6. Leapfrog LeapPad 3 Display Assembly Replacement: paso 6, imagen 1 de 3 Leapfrog LeapPad 3 Display Assembly Replacement: paso 6, imagen 2 de 3 Leapfrog LeapPad 3 Display Assembly Replacement: paso 6, imagen 3 de 3
    • Unscrew the three 6.5 mm phillips head screws holding down the speaker to the right of the audio jack.

    • Remove the board and speaker from the device.

  7. Leapfrog LeapPad 3 Display Assembly Replacement, Motherboard: paso 7, imagen 1 de 2 Leapfrog LeapPad 3 Display Assembly Replacement, Motherboard: paso 7, imagen 2 de 2
    • Unplug the front facing camera cord with an opening tool to free the top of the motherboard.

  8. Leapfrog LeapPad 3 Display Assembly Replacement: paso 8, imagen 1 de 3 Leapfrog LeapPad 3 Display Assembly Replacement: paso 8, imagen 2 de 3 Leapfrog LeapPad 3 Display Assembly Replacement: paso 8, imagen 3 de 3
    • Remove the three 6 mm phillips head screws holding the motherboard to the display assembly.

  9. Leapfrog LeapPad 3 Display Assembly Replacement: paso 9, imagen 1 de 3 Leapfrog LeapPad 3 Display Assembly Replacement: paso 9, imagen 2 de 3 Leapfrog LeapPad 3 Display Assembly Replacement: paso 9, imagen 3 de 3
    • Carefully lift the motherboard out of the case, exposing the last remaining cord on the underside of the motherboard.

    • Disconnect the gold display assembly cord with an opening tool to fully disconnect the motherboard.

    • The device was rotated 180 degrees in order to unplug the display assembly cord.

  10. Leapfrog LeapPad 3 Display Assembly Replacement, Display Assembly: paso 10, imagen 1 de 2 Leapfrog LeapPad 3 Display Assembly Replacement, Display Assembly: paso 10, imagen 2 de 2
    • Unscrew the eight 6.5mm Phillips #0 screws from the plastic casing.

    Please add markup to the screws and state which screwdriver size to use.

    John Santoro - Contestar

  11. Leapfrog LeapPad 3 Display Assembly Replacement: paso 11, imagen 1 de 3 Leapfrog LeapPad 3 Display Assembly Replacement: paso 11, imagen 2 de 3 Leapfrog LeapPad 3 Display Assembly Replacement: paso 11, imagen 3 de 3
    • Remove the covering with your hands to allow full view of the display assembly.

  12. Leapfrog LeapPad 3 Display Assembly Replacement: paso 12, imagen 1 de 3 Leapfrog LeapPad 3 Display Assembly Replacement: paso 12, imagen 2 de 3 Leapfrog LeapPad 3 Display Assembly Replacement: paso 12, imagen 3 de 3
    • Remove the display assembly from the black rubber sleeve carefully.

    • There is a specific orientation for the rubber sleeve so take note of its position.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Matt Irvine

Miembro Desde 02/04/16

952 Reputación

6 Guías creadas

Equipo

USF Tampa, Team 16-2, Blackwell Winter 2016 Miembro de USF Tampa, Team 16-2, Blackwell Winter 2016

USFT-BLACKWELL-W16S16G2

3 Miembros

12 Guías creadas

4 comentarios

Everything worked ok but unit now will not go to home page. after I replaced the display. They tell you necessary tools but never tell you where or how to use the wrist grounding strap.

Dave Alan - Contestar

Bonjour, j’ai bien réussi à accéder à l’écran,

Ma question:

Oû peut-on se procurer un écran neuf SVP?

Gregory Commarmond - Contestar

Pouvez vous m'indiquer où trouver un écran de remplacement ?

Merci d'avance

Domi Luky - Contestar

OK, Visiblement ce tuto ne sert plus à rien car il est Impossible de trouver le display de remplacement!!

Domi Luky - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 1,057