Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the barcode covering the two screws on the lower back of the Leap Pad.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two 5 mm screws that were covered by the sticker.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a plastic opening tool, pry off the outer protective child proof casing, starting from the bottom.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 7 mm screw to the right of the cartridge dock, two 8 mm screws in the top left, and the nine 8 mm screws holding the the green shell.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the hard plastic casing, exposing the motherboard and battery.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the battery using tweezers or your fingernails.
-
The battery is glued down, if available put some isopropyl alcohol around the edges of the battery to soften the glue.
-
Gently pry of the battery lose using a spudger or another thin prying tool.
-
Cancelar: No complete esta guía.
7 personas más completaron esta guía.
4 comentarios
I’m not Ryan, but I just did this process and the apps and files are all still there.
Hello, if anyone still has this leappad Ultra and wanted to purchase a new battery. I have found a retail store https://batteryclerk.com/ The price is reasonable, and I'm just waiting for the batteries to arrive.