Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
The purpose of this guide is to replace the LeapPad's battery. The battery is essential to receiving any form of functionality from the device. Without a working battery the device is powerless. Once the replacement is finished, be sure to properly dispose of the old battery at appropriate locations such as a batter recycling center.
Qué necesitas
-
-
Remove the barcode covering the two screws on the lower back of the Leap Pad.
-
-
-
-
Using a plastic opening tool, pry off the outer protective child proof casing, starting from the bottom.
-
-
-
Remove the 7 mm screw to the right of the cartridge dock, two 8 mm screws in the top left, and the nine 8 mm screws holding the the green shell.
My device had the 7mm screw to the right of the cartridge slot and the 2 to the left of the cartridge slot were also 7mm.
the other 9 were indeed 8mm,
Mike.
-
-
-
Disconnect the battery using tweezers or your fingernails.
-
The battery is glued down, if available put some isopropyl alcohol around the edges of the battery to soften the glue.
-
Gently pry of the battery lose using a spudger or another thin prying tool.
This was extremely helpful, and easy to do!! Thank you so much! You saved the day!
-
To reassemble the device, follow these instructions in reverse order.
To reassemble the device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
7 personas más completaron esta guía.
4 comentarios
I’m not Ryan, but I just did this process and the apps and files are all still there.
Hello, if anyone still has this leappad Ultra and wanted to purchase a new battery. I have found a retail store https://batteryclerk.com/ The price is reasonable, and I'm just waiting for the batteries to arrive.