Repara tus cosas Comunidad Tienda

LeapFrog Scribble and Write Speaker Replacement

Introducción

This guide is for those who are looking to replace their Scribble and Write’s speaker due to muffled or distorted sounds. Familiarity with soldering is necessary in being able to replace the speaker. Please be sure to follow each and every step to avoid mishaps and causing further damage to the toy.

For more information on how to solder and desolder connections, please visit this guide.

Qué necesitas

  1. LeapFrog Scribble and Write Speaker Replacement, Speaker: paso 1, imagen 1 de 1

    • Turn your toy over so that the back is facing upward.

    Editar

  2. LeapFrog Scribble and Write Speaker Replacement: paso 2, imagen 1 de 1

    • Using a Phillips #00 screwdriver, unscrew all circled areas.

    Editar

  4. LeapFrog Scribble and Write Speaker Replacement: paso 3, imagen 1 de 1

    • Very carefully, remove the back case to reveal the contents of the toy.

    Editar

  5. LeapFrog Scribble and Write Speaker Replacement: paso 4, imagen 1 de 1

    • Using a Phillips #00 screwdriver, remove the screw highlighted in the image.

    Editar

  6. LeapFrog Scribble and Write Speaker Replacement: paso 5, imagen 1 de 1

    • Un-solder the wiring from the speaker and motherboard.

    • Caution: Be careful when using a soldering iron. Improper usage may result in burns.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 7 otros colaboradores

Anthony Kidd

Miembro Desde 02/10/16

256 Reputación

2 Guías creadas

Insignias: 14

+ 11 más insignias

Equipo

USF Tampa, Team 1-5, Nance Spring 2016 Miembro de USF Tampa, Team 1-5, Nance Spring 2016

USFT-NANCE-S16S1G5

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 18

Todo El Tiempo: 728