Saltar al contenido principal

Introducción

In this guide, you will learn how to replace a LeapFrog Scribble and Write motherboard. You will need a soldering iron to remove certain wiring from the motherboard.

Partes

No se especificaron partes.

  1. LeapFrog Scribble and Write Motherboard Replacement, Motherboard: paso 1, imagen 1 de 1
    • Use a Phillips head screwdriver to remove the screw from the battery compartment on the back of the toy.

  2. LeapFrog Scribble and Write Motherboard Replacement: paso 2, imagen 1 de 1
    • Remove the back battery cover and all of the batteries.

  3. LeapFrog Scribble and Write Motherboard Replacement: paso 3, imagen 1 de 1
    • Use a Phillips screwdriver to remove the nine case screws from the back of the toy.

    • Be careful to keep track of the screws.

  4. LeapFrog Scribble and Write Motherboard Replacement: paso 4, imagen 1 de 1
    • Remove the back cover from your toy.

  5. LeapFrog Scribble and Write Motherboard Replacement: paso 5, imagen 1 de 1
    • Using a Phillips screwdriver, remove the four screws from the motherboard.

  6. LeapFrog Scribble and Write Motherboard Replacement: paso 6, imagen 1 de 1
    • Remove the keyboard ribbon from the motherboard.

  7. LeapFrog Scribble and Write Motherboard Replacement: paso 7, imagen 1 de 1
    • Remove the speaker wires from the motherboard with your soldering iron.

  8. LeapFrog Scribble and Write Motherboard Replacement: paso 8, imagen 1 de 1
    • Remove the battery wires from the motherboard with the soldering iron.

  9. LeapFrog Scribble and Write Motherboard Replacement: paso 9, imagen 1 de 1
    • Remove the switch wires from the motherboard with the soldering iron.

  10. LeapFrog Scribble and Write Motherboard Replacement: paso 10, imagen 1 de 1
    • Remove the pen wires from the motherboard with the soldering iron.

  11. LeapFrog Scribble and Write Motherboard Replacement: paso 11, imagen 1 de 1
    • Remove the volume control switch from the motherboard with the soldering iron.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Shang

Miembro Desde 10/02/16

328 Reputación

3 Guías creadas

Equipo

USF Tampa, Team 1-5, Nance Spring 2016 Miembro de USF Tampa, Team 1-5, Nance Spring 2016

USFT-NANCE-S16S1G5

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 460